WALK-IN-STABILITY TEST CHAMBER

  • Walk in stability chamber

  •     Name of EquipmentLABTOP® PLC based Walk-in-Stability Test Chamber
        Control SystemProgrammable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 3.8” Color HMI with touch screen and Ethernet connectivity
        Air CirculationBlowers to have uniformity of Temperature under loaded condition.
        AlarmAudio Visual Alarm if the temperature deviates from the preset Temperature
        LightingInterior illumination for working area.
        Insulation80mm Thick CFC free PUF Insulated modular cabinet
        Heating SystemU shaped S.S. Nichrome wire air heaters
        Observation DoorInside see through unbreakable acrylic door
        Refrigeration SystemHermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
        Humidity SystemNon condensing type steam injection system with water level arrangement with insulation to save heat energy.
        PowerWorks on 230/430 V AC single / three phase 50Hz
        OtherMCB, Heavy duty latch with lock & key.
        Safety Features
    1. Float switch to cutoff the mains supply in case of low water level in the boiler tank.
    2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
    3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
        Certifications ISO 9001: 2008 and ISO 13485 : 2012
        Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports

SPECIFICATION

Temperature Range 20° C to 60° C
Temperature Accuracy ± 0.2° C
Temperature Uniformity 2° C
Humidity Range 40% RH to 95% RH
Humidity Accuracy ± 2% RH.
Humidity Uniformity ± 3% RH.

Standard Models: Inner Stainless steel 304 & Outer Galvanized Iron Pre-Painted

Models Capacity In liters Internal Size in Meters (WxDxH) External Size in Meters (WxDxH) No. Of Trays
LSC-4500P 4500 1.5 x 1.5 x 2.0 1.6 x 1.6 x 2.1 18
LSC-8000P 8000 2.0 x 2.0 x 2.0 2.1 x 2.1 x 2.1 24
LSC-12500P 12500 2.5 x 2.5 x 2.0 2.6 x 2.6 x 2.1 36
LSC-18750P 18750 2.5 x 3.0 x 2.5 3.1 x 3.1 x 2.6 36
LSC-22500P 22500 3.0 x 3.0 x 2.5 3.1 x 3.1 x 2.6 48
LSC-27000P 27000 3.0 x 3.0 x 3.0 3.1 x 3.1 x 3.1 48

GMP Models: Inner Stainless steel 304 & Outer Galvanized Iron Pre-Painted

Models Capacity In liters Internal Size in Meters (WxDxH) External Size in Meters (WxDxH) No. Of Trays
LSC-4500P/GP 4500 1.5 x 1.5 x 2.0 1.6 x 1.6 x 2.1 18
LSC-8000P/GP 8000 2.0 x 2.0 x 2.0 2.1 x 2.1 x 2.1 24
LSC-12500P/GP 12500 2.5 x 2.5 x 2.0 2.6 x 2.6 x 2.1 36
LSC-18750P/GP 18750 2.5 x 3.0 x 2.5 3.1 x 3.1 x 2.6 36
LSC-22500P/GP 22500 3.0 x 3.0 x 2.5 3.1 x 3.1 x 2.6 48
LSC-27000P/GP 27000 3.0 x 3.0 x 3.0 3.1 x 3.1 x 3.1 48

OPTIONAL ACCESSORIES

SR-100 Ready to use stand by refrigeration system in case of regular system fails. Complete with compressor condenser, evaporator and other Accessories with gas charging.(Above 600 Liters)
SH-1 Ready to use stand by Humidity System in case of regular system fails.
PS–8 4 channel RH and 4 channel temperature data Scanner for record, store and print the data online and off line with variable print time intervals and Ethernet connectivity
PS–16 8 channel RH and 8 channel temperature data Scanner for record, store and print the data online and off line with variable print time intervals and Ethernet connectivity
GSM-5 Mobile alert via GSM Technology in case of system failure
AT-1 Additional tray suitable for above equipment
LW-21 “LABTOPWARE” CFR 21 Part 11 compliance Windows based Communication software for data management. Complete with multi dropping to monitor multiple chambers to one software
BB-8 Online uninterrupted power supply for PLC
DV-8 Validation charges per day (8 hrs)